crunchbang

• remap

setxkbmap -option caps:super
/home/username/.config/openbox/autostart


/home/username/.config/openbox/autostart

• hangul
• scim은 자소가 분리됨. scim-hangul도 없구만.
• ~~(http://bahndal.egloos.com/365281)~~
• nabi 설치하자
• http://fishbear.tistory.com/entry/%EC%A0%80%EC%82%AC%EC%96%91-%EB%84%B7%EB%B6%81%EC%97%90-Linux-%EA%B9%94%EA%B8%B0
• vlc
• 한글 자막
• ttf-nanum-coding 설치 후, 설정, CP949, 나눔 코딩 선택
• ATI hdmi audio
• 자막 싱크
• apt-get install subtitleeditor
• hdmi 스위치 통한 모니터 인식 불량
• Go into the BIOS and enable all the C-States and/or try a newer kernel. If that is working and it hopefully uses less power, try playing with the legacy options for your projector. Otherwise take a look at manually editing the Xorg config file for your projector. I never had to do this, so I can't really help you. On my projector everything works ootb (currently typing this message from my J1800-D2H and using my 720p projector as monitor)
• custom edid?
• http://ubuntuforums.org/showthread.php?t=2286157
• gigabyte?
• 1. Connect the monitor by the VGA cable.
• 2. Enter BIOS/UEFI (press ESC when the Gigabyte logo is visible)
• 3. Go to Advanced, CSM Configuration
• 4. Set Video to “Legacy first”. Attention: When set to “UEFI”, not visible. it require clear CMOS.
• 5. Save and exit, turn off the PC.
• 6. Connect the monitor by the DVI cable and turn on the PC.